Home > ECIG PARTS & ACCESSORIES > RDA & RBAS > EHPRO >

Plume Veil RDA Clone by EhPro
Plume Veil RDA Clone by EhPro


 
Our Price: $30.00
Sale Price:: $22.99
You save $7.01!



Availability:: Usually Ships in 24 to 48 Hours
Product Code: PLUME-RDA

Choose Your Color

color*:


 
 
Description



The EHpro Plume Veil clone has a unique design over other rebuildable atomizers. This RDA is equipped with three points of airflow for a vacuum effect, air flows through the front and back of the coil through the top cap. The stainless steel rotating center post can accommodate a multitude of different coil building options. The large holes in the center posts provide very thick gauge wire or twisted and parallel builds. The insulator can withstand a lot more heat than your average RDA.




Features
The Plume Veil RDA (rebuildable drip atomizer) clone is one unique design. First, the atomizer is equipped with three separate airflow sources; air flows in front of the coil with AFC (air flow control). Second, is the air holes through the negative posts to channel air to the back side of the coil. Third, the air holes located in the top of the cap to create a vacuum effect. While a good portion of the atomizer is made from stainless steel construction, the negative posts are milled into the deck and with the Midas touch, gold plated along with the center contact pin for superior performance. The stainless steel, rotating "T" center post can accommodate a multitude of different builds. The large bored post holes provides thick or twisted wire coil setups effortless, while the high heat insulator surrounding the center the post and black delrin attached on the top cap allows it to withstand high temperatures. A matching drip tip that is supplied, a 22mm diameter will definitely make your mod complete.

SPECIFICATIONS:

Stainless steel body
22mm diameter
Dual, single or quad coil compatible
Phillips screws
Deep juice well
Milled negative posts, no turning, EVER!
Adjustable single or dual air-flow
Unique airflow brings air from 3 places - slots in front of coils, holes through negative posts & holes in top cap for vacuum effect!
Engraved logo
Delrin insulator
Matching Plume Veil drip tip included
Gold plated base and negative posts, along with 510 contact
Stainless steel positive block

INCLUDES:

1 x Plume Veil RDA clone
1 x Drip Tip
Extra O-Rings
Extra Screws
Tool

INFORMATION YOU NEED TO READ PRIOR TO PURCHASE:

1.) RDA's are intended for advance users who have a basic understanding of electronics ONLY!!
2.) RDA's are intended for advance users who have a basic understanding of OHM readers ONLY!!
3.) RDA's are intended to be used and we recommend IMR batteries ONLY!!
4.) RDA's are intended to be used on mechanical mods ONLY!!
5.) RDA's should ALWAYS be tested prior to use!!
6.) RDA's CAN destroy electronic devices if coils and wicks are not built correctly.

This product does not have manufacture warranty against defects. You as the user agree to properly use the RDA given the guidelines stated above.

Accessories for this product...
Rebuildable Atomizer Kanthal A-1 Resistance Wire 30 Feet
Our Price: $3.99

Add
Rebuildable Atomizer Kanthal A-1 Resistance Wire 30 Feet

Share your knowledge of this product with other customers... Be the first to write a review