Home > Ecig Parts & Accessories > Replacement Coils/Heads for Ecig Tanks and Atomizers >

PRO Tank Version II Bottom Coil Clearomizer (BCC) with Pyrex Glass Tube
PRO Tank Bottom Feeder Clearomizer with Pyrex Glass Tube


 
Our Price: $24.99
Sale Price:: $21.95
You save $3.04!


Product Code: PROTANKGLASS2

Atomizers


Pyrex Clear None Tapered

color*:


 
 
These are the same bottom feeding design as the original PRO Tank except the Kanger Pro Tank II can be completely disassembled for cleaning and any 9.2mm drip tip can be used. The Kanger PRO Tank II uses the same coils as the original PRO Tank. The Pyrex Glass tube on the Kanger Pro Tank II means you will never have to worry about the tube cracking due to acidic juices.

The Kanger Pro Tank II Fits all our eGo e Cig products and come blank ready to fill with your favorite liquid! No syringe needed to fill, just screw the bottom off, fill with your favorite premium eLiquid, screw the bottom back on and you're ready for the best vaping experience ever. The advantage of bottom feeding clearomizers is the atomizer is at the bottom which is where the liquid stays when you vape meaning the wick is always wet. The Kanger PRO Tank II Bottom Feeding Clearomizer is easy to fill, produces great flavor and vapor, and no worries of leaking or burnt wick taste.

Holds 3ml of e juice. This is a must have for serious vapers!

Replacement PRO Tank II Atomizer Coils are available in 1.8ohm, 2.2 ohm, and 2.5ohm. If you're using a standard 3.7v eGo battery any ohm will work, if you are using an eGo Variable Voltage Battery or a Higher Voltage Device the 2.2ohm or 2.5ohm is the best option for you.

Bottom coil clearomizers on the Pro Tank II provide a nice warm vapor, with a very clean pure flavor, and reduced wicking issues since the liquid is always covering the wicks.

Unlike other Clearomizers, the mouthpiece of the PRO Tank is permanently attached and it is filled from the bottom. This two-piece design is a major advantage over other tanks with replaceable atomizer heads. If the PRO Tank Coil fails unexpectedly and the tank is filled with eLiquid, the atomizer head can be easily replaced without the need to drain the eLiquid out of the tank first.

Product Comes With:
1 - PRO Tank Clearomizer assembly with detachable drip tip
2 - 2.5ohm Atomizer Heads

** Please Note: These are designed to screw onto any device with a 510 thread connector.

How to fill PRO Tank II Bottom Feeding Clearomizer:
Hold the PRO Tank II upside down with the drip tip facing down
Unscrew the bottom assembly from the tube
Fill with 3ml E-Juice by tilting the PRO Tank II at a slight angle and dripping juice down the inside wall against the outer wall of Glass Tank.
Do not put eliquid into the center tube as it will leak out the bottom of clearomizer.
Check to be sure the coil is tight then screw the bottom assembly back onto tube.
Screw onto electronic cigarette device and you're ready to vape.
How to change the atomizer head on Kanger PRO Tank II Bottom Feeding Clearomizer:

Unscrew the bottom assembly from the tube, remove the old coil and simply screw a new coil assembly into base.
Fill with 3ml E-Juice by tilting the Pro Tank II at a slight angle and dripping juice down the inside wall against the outer wall of Glass Tank.
Do not put eliquid into the center tube as it will leak out the bottom of clearomizer.
Screw onto electronic cigarette device and you're ready to vape.

Tips for using the Glass Bottom Feeding PRO Tank II:

The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.
When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the PRO Tank Clearomizer.
Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece.
The atomizer head of the PRO Tank can loosen when unscrewing the tube or base. Always secure the atomizer head before re-installing the base of the PRO Tank.
It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. Always clean the battery threads before charging it.
PRO Tank Atomizer heads have an average lifespan between 10 to 20 days. When the atomizer head wears down, it may begin to leak.

Accessories for this product...
Coils for EVOD/ PRO Tank & Pro Tank 2/ Kanger t3s Bottom Feeder Tank( Single)
Our Price: $1.99

Add
Coils for PRO Tank Bottom Feeder Tank( Single)

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
 
4 of 5 It's a good tank December 12, 2013
Reviewer: John from CA United States  
My tank has a lose drip tip but other than that it's a good tank for a person on the go. When I leave the house this is my go to tank. Easy to fill and maintain.

Was this review helpful to you?


Browse for more products in the same category as this item:

Ecig Parts & Accessories > Replacement Coils/Heads for Ecig Tanks and Atomizers
Ecig Parts & Accessories > Ecig Clearomizers, Glass Vape Tanks
Ecig Parts & Accessories > Ecig Clearomizers, Glass Vape Tanks > Kanger Clearomizers and Tanks
Ecig Parts & Accessories
Ecig Parts & Accessories > Vape Cartomizers, eGo Cartomizers, Refillable Cartomizers