This is updated version of IPV V2 mod.

Instruction:

1. Press the power button 5 times continuously to turn on/off the device.

Once turning on, you can see “Pioneer4you”,“iPV 2S”and then step into standby mode. Once turning off, you can see “System Off”.

2. Adjust Wattage. Under the standby mode, press the "+/-" button to adjust the wattage.

(The adjustment will speed up when keep pressing the "+/-" button for long time.)

3. Fire. Press the power button on the standby mode, the device will be activated.

Or Press the power button on the standby mode, then press the fire touch sensor, the device will also be activated. The device can be fired by pressing the tough sensor.

Keep pressing the button”-” and power button, the screen will show “TOUCH OFF” and the touch sensor function is locked; Keep pressing the button”+” and power button, the screen will show “TOUCH ON” and the touch sensor function is unlocked.

4. Lock/Unlock. Press both the + and - buttons for five seconds to lock your device from unwanted fire. The digital screen will show “LOCK”. Press the + and - button for five seconds a second time to unlock it.

5. Charging. Take IMR 18650 Li-ion battery out from the mod, charge it by specified charger.

6. Software upgrade/GUI operation. Please download the software upgrade SXiTM from www.YiHiecigar.com “download” column navigation and install it on your computer. Then connect the box to your computer by the USB cable and then operate the upgrade function.

Specifications:

Output Power: 7W - 70W

Output Voltage: 3.6V - 8.5V

Input Current: 1.3A - 20A

Input Voltage: 3.2V - 4.5V

Efficiency: 93%

Loading Resistance: 0.2Ω - 3.0Ω

Note:The IPV V2S can only accept one IMR 18650 batteries. This is an advanced mod for advanced users only. Please be aware that this mod requires knowledge of battery safety and technical know-how to work properly.

Brand: Pioneer4You

Size: Height 100mm;Width 50mm;Depth 22mm

Color: Silver

Box Material: Aluminum

Threading: 510

Package: Crystal Box

Each set contains:

1pc IPV V2S 60w Box Mod

1pc USB cable

1pc Screw driver

2pc Spare screw

1pc User manual

Warranty: 3-Day Non-DOA